Burlington measures 630mm x 350mm x 380mm (length x width x height) however, more importantly, the space required around the pump for it to fit are: 500mm from the back of the round outlet valve on top of the pump to a wall or whatever is behind it (this allows for airflow around the pump) 180mm from the centre of the round outlet valve on top of the pump to each side of the pump 410mm clear height above the ground where it will be placed.

Blast Door measures 400mm x 350mm x 380mm (length x width x height) however, more importantly, the space required around the pump for it to fit are: 360mm from the front of the round outlet valve on top of the pump to a wall or whatever is in front of it 180mm from the centre of the round outlet valve on top of the pump to each side of the pump 410mm clear height above the ground where it will be placed.

Overall measurement when Burlington and Blast Door are combined together to create Fort Knox are 900mm x 350mm x 380mm (length x width x height)

NO! Our entire Fort Knox (Burlington and Blast Door combined) is assembled in 3 minutes using only an impact driver.

There is no need to dig out and level the area for it as it is placed directly around the pump (which is usually already level)!

No need to build a frame to place it on!

No hinged lid to catch and not close properly!

Click here to see for yourself

We usually keep stock and ship next business day. Once shipped, the product will arrive in 2-3 business days.

Combining the Burlington and Blast Door can achieve a 71% noise reduction. This Acoustic Engineers Reports shows an average of a 18 dB noise reduction being achieved when you combine the Burlington and the Blast Door. The Burlington on it's own achieves a 11 dB reduction which we have found satisfies most certifiers, especially for Complying Development Approvals.

The measurements in the report were conducted in line with typical council requirements. Click here to download the report.

We have taken great care in designing the unit to allow for as much airflow as possible whilst striking a balance to achieve sound reduction. However, any enclosure you place over the top of your pump has the risk of overheating the pump.

We offer a money back guarantee, just give us a call and let us know what it is you don't like and we will talk you through the process of sending it back and refunding the money for the product.

Other colours are available at an additional cost of approx. $40 and would be done by special order. Additional shipping time would be necessary. 

We have specifically designed it to fit most pool pumps. We always suggest it is a good idea to check that it will fit both the pump as well as ensuring that there is enough space around the pool pump. A few crucial dimensions of your pool pump are: 380mm length (measured from the centre of the round outlet valve on top of the pump to the back of the pump)300mm wide (at it's widest point)355mm high (to the top of the pump)

It is only the pump that needs an enclosure as it is the only item that makes noise  There is no need to cover the other items that make up your filtration as any quality product are built for the outdoor environment that they live. Why pay for an expensive cover to cover everything when you don’t need to?